Clemmons brick patio pavers installation and washing overview
Premier Exterior Services recently completed a Brick patio pavers installation with front walkway and washing project in Clemmons, NC 27012. The homeowner wanted a durable, low-maintenance outdoor space that complemented the front porch and improved curb appeal, along with a thorough exterior refresh. Before we arrived, the brick surfaces were uneven and dingy from algae, the front walkway had settled joints, windows were streaked, and the siding needed a gentle house wash. After our work, the new brick patio and front walkway looked crisp and level, joints were stabilized, the porch was renewed, windows were crystal clear, and the home’s exterior was spotless with a soft, even finish.
Brick patio paver installation and washing in Clemmons NC
The scope included a complete “Brick Patio and Pavers, Front Porch and Walkway, Exterior Window Cleaning, and House Wash.” The client requested a timeless brick layout that tied into the home’s architecture, a smooth, safe front walkway with clean transitions to the porch, and a comprehensive cleaning package to brighten the entire façade. Our goals were to build a stable paver system with proper drainage, restore the porch and brickwork with professional washing, deliver streak-free exterior windows, and soft wash the siding and soffits to remove organic growth without damage. The finished space needed to be beautiful, long-lasting, and easy to maintain.
Materials and tools for Clemmons brick patio and walkway
For the patio and front walkway we used compacted graded base (crusher run), a geotextile stabilization fabric to separate native Piedmont clay from the base, concrete paver edging restraints with spikes, bedding sand, and polymeric joint sand for long-term joint lock and weed resistance. We installed high-quality clay brick pavers matched to the home’s existing brick tones. Tools included a plate compactor with protective mat, laser level, string lines, masonry wet saw for precise cuts, dead blow mallets, and joint stabilizing sprayers.
For washing and exterior cleaning, we used a professional pressure washer with surface cleaner for horizontal brick, a soft wash system for siding and porch surfaces, and a window cleaning setup featuring pure water DI filtration and squeegee tools. Cleaning solutions included a low-percentage sodium hypochlorite blend with surfactants for organic growth and a pH-neutral detergent for general soiling. We protected landscaping with pre-wet and post-rinse procedures and utilized low-pressure nozzles to safeguard delicate areas.
Challenges and solutions for Clemmons patio pavers and washing
We encountered sections of settled subgrade and clay-heavy soil common to the Clemmons area, which can trap moisture. To solve this, we over-excavated soft spots, installed geotextile fabric, and rebuilt the base with proper compaction in lifts. A slight grade was introduced to direct water away from the home and toward lawn areas, minimizing future settling and algae growth.
The existing brick and porch surfaces had embedded algae and oxidation near metal fixtures. We used test patches to dial in the lowest effective chemistry and contact time, then neutralized and rinsed thoroughly. Around the windows and trim, we reduced pressure, applied a gentle detergent, and finished with pure-water rinsing to prevent spotting. Edging along garden beds was protected with temporary shields to prevent sand or wash solution intrusion.
Step by step Clemmons patio pavers and house washing
Initial assessment: We measured the patio and walkway footprint, checked elevations for drainage, documented problem areas in the subgrade, and color-matched pavers to the home’s masonry. We also evaluated siding, porch surfaces, and window condition to determine the safest effective cleaning approach.
Site prep and base: We excavated to the required depth, installed geotextile, and built the base with compacted crusher run in lifts, verifying slope with laser leveling. Edging restraints were laid out to hold the paver field and maintain crisp borders along the front porch and walkway.
Paver installation: We screeded a uniform bedding sand layer, laid brick pavers in a classic running bond with soldier-course borders, and made precise cuts at transitions. After seating the field with a plate compactor, we swept in polymeric sand, compacted again, and activated the sand for locked joints.
Porch and brick washing: Horizontal brick and the porch received a controlled clean using a surface cleaner and targeted nozzles. Stains and algae were treated with a mild solution and rinsed thoroughly to protect mortar and brick faces.
House washing and windows: Siding, soffits, and trim were soft washed at low pressure to remove organic growth without damage. Exterior windows were cleaned using DI pure water and squeegee techniques for a streak-free finish.
Final results: The new brick patio and front walkway are smooth, level, and beautifully integrated with the porch. Clean joints, stable edging, and proper drainage set the project up for long-term performance. The house wash and exterior window cleaning brightened the entire property, dramatically boosting curb appeal. If you’re in Clemmons or the greater Piedmont Triad and want similar results, contact Travis at Premier Exterior Services for a fast, free estimate and responsive, friendly service.
Project Photos
